Kodak X-Omat 460 RA Processor Installation Instructions Manual page 8

Removing the Processor from the Shipping Skid
The processor weighs over 200 kg (442 lb), therefore use 2 people when installing the LEVELING
SCREWS and moving the processor into position.
The processor is not attached to the SHIPPING SKID. Use care when moving the SKID.
[1] Move the processor, on the SHIPPING SKID, as close as possible to the processor's final destination.
8
Installing the Processor
PROCESSOR
SKID
Figure 7 Processor Mounted on Shipping Skid
H108_0017CCA
H108_0017CA
636738