Kodak X-Omat 460 RA Processor Installation Instructions Manual page 10

Installing the Light-Tight Gasket
[1] Install the LIGHT-TIGHT GASKET onto the
end of the processor (receiving end or feed
end) that will be against the darkroom wall.
Do not stretch the GASKET.
Installing the Feed Shelf
[1] Install the FEED SHELF using:
• 5 SCREWS
• 5 WASHERS
• 5 LOCK WASHERS
10
Figure 9 Installing the Light-Tight Gasket
NOTE
Do not tighten the SCREWS.
LIGHT - TIGHT
GASKET
H108_0032ACA
H108_0032AA
636738