Kodak X-Omat 460 RA Processor Installation Instructions Manual page 15

[3] Install:
• DEVELOPER RACK
• FIXER RACK
• WASH RACK
DEVELOPER
RACK
ASSEMBLY
Leveling the Processor
To prevent damaging the LEVELING
SCREWS and the processor, do not
allow more than a 25 mm (1 in.)
clearance between the bottom of the
processor and the HEAD of the
LEVELING SCREW.
636738
FIXER RACK
ASSEMBLY
Figure 17 Installing the Racks
LEVELING
SCREW
HEAD
Figure 18 Adjusting the Leveling Screws
WASH
RACK
ASSEMBLY
H108_0173BCA
H108_0173BA
H108_0036ACA
H108_0037AA
15