Kodak X-Omat 460 RA Processor Installation Instructions Manual page 16

[1] Check that the RACKS are in their correct positions and that the GEARS of the RACK ASSEMBLIES
engage with the GEARS of the MAIN DRIVE SHAFT.
MAIN
DRIVE
SHAFT
GEAR
H108_0063BCA
H108_0063BA
The edge of the LEVEL could cause damage to the surface of the ROLLER.
[2] Place a LEVEL as shown in the illustration. Adjust the LEVELING SCREWS to level the processor from
front to back and from side to side.
16
RACK
ASSEMBLY
GEAR
Figure 19 Positioning the Racks and Gears
Figure 20 Leveling the Processor
LEVEL
ROLLERS
H108_0058BCA
H108_0058BA
636738