Kodak X-Omat 460 RA Processor Installation Instructions Manual page 6

[11] Remove the RECEIVING-END ACCESS PANEL from the processor.
[12] Remove the 3 DRAIN HOSES from the RECEIVING BIN.
[13] Remove the WRAPPED ITEMS from inside the front of the processor and keep them for later installation.
[14] Remove the NON-DRIVE SIDE ACCESS PANEL from the processor.
CONTROL PANEL
FEED-END
LOWER ACCESS PANEL
RECEIVING-END
ACCESS PANEL
RECEIVING
BIN
6
Figure 4 Feed-End View of Processor
Figure 5 Receiving-End View of Processor
NON-DRIVE SIDE
ACCESS PANEL
FEED-END
MIDDLE ACCESS PANEL
H108_0137BCA
TOP COVER
DRIVE SIDE
ACCESS PANEL
H108_0003BCA
H108_0137BA
H108_0003BA
636738