Kodak X-Omat 460 RA Processor Installation Instructions Manual page 3

Removing the Packing Material
[1] Cut the metal bands around the outside of the shipping carton.
[2] Remove the shipping carton from the processor.
[3] Remove the internal CARDBOARD from the top of the processor.
[4] Remove the TOP COVER from the processor.
[5] Remove:
• DEVELOPER/FIXER CROSSOVER
• FIXER/WASH CROSSOVER
• DETECTOR CROSSOVER.
[6] Remove the SQUEEGEE ASSEMBLY from the processor.
[7] Remove the PACKING MATERIAL covering the RACK HANDLES.
[8] Remove the CARDBOARD from between the WASH RACK and the WASH TANK.
DEVELOPER/FIXER
CROSSOVER
DETECTOR
CROSSOVER
ASSEMBLY
636738
Unpacking the Processor
Figure 1 Crossover Identification
SQUEEGEE
ASSEMBLY
FIXER/WASH
CROSSOVER
H108_0138BCA
H108_0138BA
3