Connecting the Wash Water Hoses
[1]
Once the DEVELOPER and FIXER REPLENISHMENT TUBES are both connected to their respective
REPLENISHMENT TANKS, connect the WASH WATER HOSES. Connect one HOSE from the QUICK
DISCONNECT to the FIXER/WASH CROSSOVER.
The WASH WATER HOSE and the CLAMP required for the installation are packed with the
processor in the separate PRE-PACK CARTON.
DEVELOPER/FIXER
CROSSOVER
DETECTOR
CROSSOVER
ASSEMBLY
[2]
Install the EVAPORATION COVERS.
20
NOTE
WASH WATER
HOSES
Figure 24 Connecting the Wash Water Hoses
FIXER/WASH
CROSSOVER
H108_0051BCB
H108_0051BA
636738