Groups; Add A Group; Group Settings; Monitor - DiGidot C4 Extended Manual

The trigger watcher can be used to monitor trigger activity.
There are three tabs, 'ALL TRIGGERS', 'UDP MESSAGES' and 'OSC MESSAGES'. Select the the trigger
tab that you want to monitor and click 'START WATCHING' all the trigger activities will be listed.
If you want to clear the screen Click 'CLEAR LOG' any time.

Groups

Home > Groups
This function allows you to create specific groups of DiGidot C4 controllers. This makes the
configuration, identification, testing, restarting and organizing specific parts of your project or
installation a lot easier.

Add a group

Home > Groups > click the '+' icon
Input fields
Title:
Select devices:

Group settings

Home > Groups > submenu: Group settings
Auto select group at start-up:
In the group settings you can set up a device or group that is selected in at the start-up of the app.
This can be useful if you create an "user" account that should only control those devices.
Hide single devices:
When you enable this option, single devices will be hidden in the "My Devices" overview (select-box
in the top bar). Groups will not be affected by this option.

Monitor

Home > Monitor
In the Monitor function you will find relevant information such as Response time, Status, MAC-
Addresses, IP Addresses and Wi-Fi status and so forth. This can be helpful when setting up your
network or for troubleshooting.
Response time
Response time shows the network message response time.
When the Response time light is green, the network connection is working.
When the Response time light is red the DiGidot C4 is not responding. Click on the "timeout" text to
get more information about the timeout session.
Status
Definitions of device statuses:
‣ Playing [scene name]: Device is playing a scene or playlist.
C4 Manual
Enter a name for this group.
Check all devices that you want to add to this group.
Version 2.2.0 50-78