Compliances & Eu Declaration Of Conformity; Warranty; Disposal And Recycling - DiGidot C4 Extended Manual

RDM
Art-Net protocol
sACN protocol
Compliances & EU declaration of Conformity
This product is designed and produced by DiGidot BV, Amsterdam, The Netherlands.
Country Of Origin is The Netherlands. Official Certificates of Origin can be issued upon request.
Hereby, DiGidot Technologies BV declares that the DiGidot C4 device complies with and
was tested according to essential requirements of all relevant CE directives.
Certificate of CE conformity: No. 2016/119-1
cETL US Listed - Intertek 5010008 I.T.E.
Conforms to ANSI/ UL 62368-1
Cert. to CAN/CSA C22.2#62368-1
DiGidot Technologies BV is a registered DMX-RDM manufacturer at tsp.esta.org, under ID 00B6h.
DiGidot Technologies BV registered Art-Net manufacturer at artisticlicence.com, under ID 0x0fd0.

Warranty

This product is covered by a carry-in manufacturer's warranty of 5 years which
covers any design faults, production faults and component failures.
Warranty voids if the product was installed or used incorrectly or not in accordance
with this manual, and/or if the product was damaged due to external factors,
opened, modified or electrically overloaded. Warranty conditions of DiGidot
Technologies B.V. apply. Warranty claims have to be issued by email:
support@digidot.eu.

Disposal and recycling

This product should not be disposed with other household waste. When you decide to
dispose this product and/or its battery, do so in accordance with local environmental
and recycling regulations.
C4 Manual
Is the implementation of Remote Device Management based on ANSI E1.20
Is a TCP IP protocol that allows multiple DMX universes to be sent over an
ethernet network and was standardized by Artistic License Holdings Ltd.
Similar to Art-Net, is a TCP IP protocol that allows multiple DMX universes
to be sent over an ethernet network.
Version 2.2.0 76-78