DiGidot C4 Extended Manual page 13

Scene recording from Art-Net sACN or DMX (DiGidot C4 Extended only)
The record function can be used to record Art-Net, sACN or DMX streams and store them as
recorded scenes.
Scene triggering by various digital or analogue control inputs (DiGidot C4 Extended only)
Recorded scenes can be triggered by a huge amount of analog and digital triggers, such as 0-10V, dry
contacts, on board push button, build-in timer, HTTP Get, UDP, OSC, Art-Net, sACN, DMX, etc.
On board Wi-Fi
The DiGidot C4 features onboard Wi-Fi for convenient wireless access through the free DiGidot app
or when accessing through the web interface. Wi-Fi can also be used for triggering.
We discourage sending Art-Net or sACN over Wi-Fi, because it can be unstable and reliable, but it is
possible.
Gamma correction
This is a function to correct the light intensity, luminance or brightness of the input. This amount of
gamma correction changes not only the brightness, but also the ratio of red, green and blue.
Adjustable fall back color
In case of absence or loss of the control signal, a fall back color can be set for every DiGidot C4. You
can also set the delay time before the fall back activates.
Online/offline firmware updates
We offer online updates easily within the user interface and offline updates in case that the DiGidot
C4 controllers are not connected to the internet. You can download the DiGidot c4 firmware at
https://digidot.eu/support/updates. Use the download link to get the file. You can upload the new
firmware at http://10.254.254.254/fwupdate.htm. You can also change the '10.254.254.254' in the URL
into the IP Address of your DiGidot C4 device. It is also possible to upgrade or downgrade multiple
devices simultaneously.
Output limiter
You can limit the output power to a pre-set brightness.
There are two ways to do this:
Brightness limiter
This option limits the individual channels to a specific percentage. This means that every
channel or LED will never exceed this percentage.
E.g.: Limiting brightness to 50%, means that all individual channels can never exceed 50% but
the control range per channel will remain the same. Effectively the percentage is applied to
the input value for each channel.
Adaptive power limiter
This option limits the total average output of all channels combined to a specific percentage
in order to decrease total power consumption. Individual channels my still output up to 100%.
C4 Manual Version 2.2.0 13-78