DiGidot C4 Extended Manual page 14

E.g.: Limiting power to 50% means that half of the channels can output 100% and the other
half at 0% or all channels at 50%, etc.
In case you would try to output all channels to 75%, the output of all channels would be
automatically limited to a total 50%, but will maintain ratios relative to each other.
16 bit dimming output
Whenever high-resolution dimming is required and supported by your IC, two input channels can be
combined to one output channel in order to convert 8 bit to 16 bit dimming.
Configure LED color order
In case a LED product has an alternative order of LED chips or dyes, you can change the order of
control channels easily in the user interface. The interface uses the default color order of the
selected IC.
C4 Manual Version 2.2.0 14-78