DiGidot C4 Extended Manual page 59

DHCP start IP Address
This is the starting IP Address of the IP Address range that the DiGidot C4 can assign to other
devices in the network.
DHCP end IP Address
This is the last IP Address of the IP Address range that the DiGidot C4 can assign to other devices in
the network.
Enable BSSID
Enable the use of BSSID
Access Point settings example
IP Address:
Subnet-mask:
Security Wi-Fi:
Wi-Fi password:
Wi-Fi name:
Wi-Fi channel:
Hide SSID:
Enable DHCP:
DHCP start IP Address:
DHCP end IP Address:
Enable BSSID:
Connect to Wi-Fi
The DiGidot C4 will connect to another Wi-Fi network. If the Wi-Fi network is secured, you need to
enter the network password.
Select a network
This shows a list of available Wi-Fi networks found by the DiGidot C4.
After selecting a network, you will be asked to enter the network password in case it is protected.
Static IP
Enable the option to fill in a static IP Address. When disabled the DiGidot C4 will use DHCP to get an
IP Address from the network.
IP Address
The (static) Wi-Fi IP Address of the DiGidot C4. Make sure it's in the same IP Address range as the
network you are connecting with.
Subnet-mask
Network broadcast range of your device.
Connect to Wi-Fi settings example
Select a network:
Password:
Static IP:
C4 Manual
172.16.0.1
255.0.0.0
Secured
123456789
DiGidot C4 Wi-Fi
Auto
Disabled
Enabled
172.16.0.2
172.16.0.30
Disabled
HomeNetwork
HomeNetworkPassword
Disabled
Version 2.2.0 59-78