The Digidot C4 Explained; Art-Net, Sacn Or Dmx Controller Required; Control Software, Dmx, Sacn & Art-Net Control Platforms; Supported Protocols (Ics) - DiGidot C4 Extended Manual

The DiGidot C4 explained

Art-Net, sACN or DMX controller required

In order for the DiGidot C4 to work in a live system setup or to be able to record scenes (DiGidot C4
extended only), a third-party Art-Net, sACN or DMX software or console is required. The DiGidot C4
controllers are known to be working with various professional grade softwares and consoles, such
as: MADRIX, Pharos, ArKaos, Resolume Arena, MadMapper, POET, grandMA and many more. As long as
the control software or console uses industry standard Art-Net, sACN or DMX protocols, you can
control the DiGidot C4 controller.
Control software, DMX, sACN & Art-Net control platforms
When the setup process has been completed, the DiGidot C4 is ready to be used with any type of
Art-Net, sACN or DMX software or console.
The DiGidot C4 can automatically be detected as an Art-Net or sACN device, depending on the
software or console. In order to do so, an Input/output configuration must be completed first.
Each DiGidot C4 needs to be configured with a unique IP address for unicasting. Assign a device
name to the DiGidot C4, for easier recognition (see the chapter Configuring the DiGidot C4).

Supported protocols (ICs)

The DiGidot C4 supports more than 60 'Data' and 'Clock+Data' SPI protocols.
All supported protocols can be found in the DiGidot C4 user interface. Go to Home > Settings >
In/out configuration > Select a port drop down menu to open the protocol list.
Please visit our website https://digidot.eu/digidot-c4 for latest overview of all supported
protocols/IC's.
For a more technical protocol overview and their performances, please check our DiGidot C4
Performance Guide on this web page: https://digidot.eu/support/documentation.
C4 Manual Version 2.2.0 11-78