Before Installation; Safety Instructions - DiGidot C4 Extended Manual

BEFORE INSTALLATION

Before installing DiGidot products it is important to consider following safety and installation
instructions.

Safety instructions

Before installation and before use of this product, read this manual carefully.
‣
Make sure that these instructions are handed over to the end-user and those responsible for
‣
installation and usage.
Local electrical and safety rules and guidelines always overrule this manual.
‣
DiGidot Technologies B.V. cannot be held liable for improper handling, product installation,
‣
usage or storage.
Installation should only be carried out by a professional and certified installer that is
‣
qualified to work on the electric installation.
Do not conduct any repairs of the device (there are no user serviceable parts inside). Any
‣
unapproved repairs and/or product modifications will void product warranty. DiGidot
Technologies B.V. cannot be held liable for any consequences.
Repairs of this product may only be carried out by the manufacturer DiGidot Technologies
‣
B.V.
Repairs and maintenance on the installation may only be carried out by qualified technicians.
‣
Always disconnect the mains power when working on a high voltage electric installation, not
‣
doing so may result in product damage or personal injuries.
‣ Do not connect or modify this product other than described in this manual.
Never use a product that is damaged or does not work correctly or when the product is
‣
visibly damaged or when the product starts to smoke, or when a crackling/sizzling noise is
audible. If this is the case in any way, please contact your supplier immediately.
‣ The DiGidot C4 is a low voltage device. Working voltage is 5-24 Vdc only.
Never connect more than one power source to the DiGidot C4 (USB OR external PSU). Never
‣
use the USB power connector when also powering with an external power source. This will
damage your DiGidot C4 and/or the USB device!
‣ The DiGidot C4 is not POE ready (Power Over Ethernet)! Applying POE will cause fatal
damage to the DiGidot C4. Make sure that POE is turned off in your access point, router or
network switch settings, before connecting the DiGidot C4 to your network.
‣ The only way to power off your device is to disconnect it from the power source.
‣ The DiGidot C4 is designed for indoor use (dry locations) only. Exposure to rain or moisture
may cause fatal damage to the controller and increase risk of electrical shock.
C4 Manual Version 2.2.0 15-78