DiGidot C4 Extended Manual page 32

2. Configure device name and network settings
Home > Settings > Network.
You can change the IP Address and subnet mask of the DiGidot C4. The IP Address needs to be
unique in your network to avoid IP conflicts.
The device name than will be shown in the network can be changed on device page.
Example of Network settings:
Device name:
IP Address:
Subnet-mask:
NOTE: These settings are just an example in order to get the DiGidot C4 to work. Alternatively,
the DiGidot C4 can be integrated in an existing network (be sure to change your DiGidot C4
network settings to match your local network). For questions about network integration,
consult a local IT or network specialist.
3. Wi-Fi settings (optional)
Home > Settings > Network settings > set Wi-Fi mode to 'Access Point' or 'Connect to Wi-Fi'
Before configuring the internal Wi-Fi of the DiGidot C4, note that sending Art-Net or sACN over Wi-Fi
is strongly discouraged, because of instability, unreliability and speed of wireless networks.
Wi-Fi is intended for configuring the DiGidot C4, playback and triggering.
The Wi-Fi IP Address range cannot be the same as the range for Ethernet.
C4 Manual
My DiGidot C4
10.0.0.2
255.0.0.0
Version 2.2.0 32-78