DiGidot C4 Extended Manual page 30

NOTE: Please note that changing your Ethernet settings can prevent you from reaching
the Internet and/or other devices in your network.
To stay connected to the Internet and use the online update and upgrade functions, it is
required to use a computer with multiple network connections (LAN or Wi-Fi).
It's recommended to write down what your current network configuration is in
order to restore these settings after you finished the configuration process if necessary.
Some laptops switch between Wi-Fi or Ethernet, in these cases you cannot have both
connections simultaneously. This can be solved by using a third-party Ethernet dongle.
On Windows computers go to:
Control Panel > Network and Internet > Network and Sharing Centre > Ethernet > Properties > Internet Protocol Version 4
(TCP/IPv4) > Use the following network settings:
On Mac computers go to:
System Preferences > Network > Ethernet > Configure IPv4 > Manually > Use the following network settings:
Network Settings
Your computer is now ready to access the DiGidot C4.
Open your web browser and go to http://10.254.254.254.
C4 Manual
IP Address
The static IP address of your computer
Subnet mask
Network broadcast range of your
computer
G ateway
Router for Internet access
IP Address
The static IP address of your
computer
Subnet mask
Network broadcast range of your
computer
Gateway
Router for Internet access
Version 2.2.0
10.0.0.1
255.0.0.0
0.0.0.0
10.0.0.1
255.0.0.0
(empty)
30-78