Checking The Tire Condition - GAS GAS MC 85 2023 Owner's Manual

13 WHEELS, TIRES
13.5
82

Checking the tire condition

Info
Only mount tires approved and/or recommended by GASGAS Motorcycles.
Other tires could have a negative effect on handling characteristics.
The type, condition, and pressure of the tires all have a major impact on the handling characteristic of the motorcy-
cle.
The tires mounted on the front and rear wheels must have a similar profile.
Worn tires have a negative effect on handling characteristics, especially on wet surfaces.
–
Clean and grease the wheel spindle.
Long-life grease (
–
Position rear wheel and mount the chain.
The brake linings are correctly positioned.
–
Insert wheel spindle
V00880-10
–
Position chain adjuster
–
Make sure that chain adjusters
5
screws .
–
Make sure that the markings on the left and right chain
3
adjusters are in the same position relative to reference
B
marks . The rear wheel is then correctly aligned.
Info
The wide adjustment range of the chain adjusters enables
different secondary ratios with the same chain length.
Chain adjusters
–
Check the chain tension. (
–
4
Tighten nut
Guideline
Nut, rear wheel spindle
–
Operate the foot brake lever repeatedly until the brake linings are in
contact with the brake disc and there is a pressure point.
S04291-10
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the front and rear tires for cuts, embedded objects, and other
damage.
» If the tires have cuts, run-in objects, or other damage:
–
Change the tires.
400602-10
p. 119)
2
.
3 4
. Mount nut , but do not tighten it yet.
3
are fitted correctly on adjusting
3
can be turned by 180°.
p. 59)
.
M20x1.5 80 Nm (59 lbf ft)
p. 41)