Code 11; Matrix 2 Of 5 Message Length; Check Digits Required - Honeywell Voyager 1202G-BF User Manual

Matrix 2 of 5 Message Length

Scan the bar codes below to change the message length. Refer to Message Length Description (page 8-1) for additional
information. Minimum and Maximum lengths = 1-80. Minimum Default = 3, Maximum Default = 80.
Minimum Message Length
Maximum Message Length

Code 11

<Default All Code 11 Settings>
Code 11 On/Off
On
* Off

Check Digits Required

These options set whether 1 or 2 check digits are required with Code 11 bar codes. Auto Select Check Digits determines
the number of check digits based on the length of the bar code. If the bar code is 10 digits or more, 2 check digits are
required. If it is 9 digits or less, 1 check digit is required. The check digit data is only transmitted if you program that feature
(see Check Digit Validation on page 8-16). Default = Two Check Digits Required.
One Check Digit Required
* Two Check Digits Required
Auto Select Check Digits
Required
8 - 15