Data Matrix Message Length; Data Matrix Code Page; Maxicode - Honeywell HH1800 User Manual

Reflective (Etched) DPM Decoding

Data Matrix Message Length

Scan the barcodes below to change the message length. Refer to
(page 82) for additional information. Minimum and Maximum lengths = 1-3116. Minimum
Default = 1, Maximum Default = 3116.

Data Matrix Code Page

Data Matrix Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the barcode being
scanned was created using a code page that is different from the one the host program is
expecting. If this is the case, scan the barcode below, select the code page with which the
barcodes were created (see
scan the value and the Save barcode from the Programming Chart, beginning on page 211.
The data characters should then appear properly.

MaxiCode

HH1800 User Guide
Minimum Message Length
ISO 2022/ISO 646 Character Replacements
Data Matrix Code Page
< Default All MaxiCode Settings >
* Disable DPM Decoding
Message Length Description
Maximum Message Length
on page 208), and
133