Code 93 Code Page
Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the bar
code being scanned was created using a code page that is different from the
one the host program is expecting. If this is the case, scan the bar code below,
select the code page with which the bar codes were created (see
Code Page
Mapping of Printed Bar Codes
on page A-5), and scan the value and the Save
bar code from the
Programming Chart
on the inside the back cover of this
manual. The data characters should then appear properly.
Code 93 Code Page
7 - 13