Figure 110 Mounting Thermal Cover - Vaisala PR-23 Series User Manual

PR-23 Series User Guide
1
1.
Pass SDI shut-off valve handle through the hole provided
in the thermal cover, making sure the label is facing
toward you.
3
3.
Close using velcro strips first the single join
on the left.
Figure 110 Mounting thermal cover
To remove the thermal cover, first open the two velcro fasteners on the right. Then open the
velcro fastener on the left, unwrap the cover underneath the sensor and then remove the
cover.
212
2
2.
Wrap cover under and around the SDI valve
body aligning the cutouts with the drain valve.
4
4.
Finally the two velcro joins on the right.
IM-EN-PR23-E