Startup And Use; Startup; Initial Check; Figure 23 Main Display Alternatives - Vaisala PR-23 Series User Manual

PR-23 Series User Guide

6. Startup and use

6.1 Startup
6.1.1 Initial check
Main display for two sensors
Main display for single sensor,
concentration and temperature
Figure 23 Main display alternatives
1. Check the wiring, see
2. Connect the power. The power indicator light and the screen light up within a few
seconds.
3. The Main display comes up, as shown in
4. In case the display shows a row of dashes, there is no corresponding sensor (for
example in the figure above, upper left, there is no sensor A, only sensor B is
connected). The diagnostic message is NO SENSOR for that sensor.
5. Check the serial number of the sensor at the upper right corner in the display.
50
Main display for single
sensor, concentration only
Main display for single sensor,
concentration and bar graph
Electrical connections (page
Figure 23 (page
24).
50).
IM-EN-PR23-E