Pr-23-Rp Prism Wash System; Figure 76 Cfc-Rp-M20-Ss/Hc/Ha-M20-Nc-Pg/Sn/Wp Flow Cell - Vaisala PR-23 Series User Manual

PR‑23‑RP mounting in 2 in line
Item. Descrip�on
1 Sensor PR-23-RP-73-M20
2 CFC-23-RP-M20-M20-NC-PG/SN/WP
3 2'' ANSI 300 Wash nozzle
4 1'' ANSI 300 blind flange
Figure 76 CFC‑RP‑M20‑SS/HC/HA‑M20‑NC‑PG/SN/WP flow cell
10.7.7 PR‑23‑RP prism wash system
A prism wash system is available for PR‑23‑RP. This requires the use of a CFC‑RP‑M20 flow
cell in combination with a 2 in ANSI 300 CFC wash nozzle. Both of these components are
available from Vaisala. All further components specifically required for the wash system
installation, are obtained independently by the customer. These include a 2 in ANSI 300 to
0.5 in ANSI 300 adapter, 0.5 in ANSI check valve, 0.5 in ANSI 300 shut-off valve, 0.5 in
supply piping for the wash media.
Supplied by Pcs. Item.
Vaisala 1 5
Vaisala 1 6
Vaisala 1 7
Vaisala 1
Chapter 10 – Sensor specifications
Descrip�on Supplied by
2"flange gasket Customer
2"ANSI 300 Welding neck flange Customer
Bolt, washer and nut for 2"flange Customer
Pcs.
5
2
32
145