Viewing System Information; Viewing Sensor Status; Optical Image With Ids; Figure 27 System Description - Vaisala PR-23 Series User Manual

6.3 Viewing system information
The DESCRIPTION selection from the Main menu, see
complete information about the system and calibration. This path is risk-free in the sense
that no values can be changed through this menu. To be able to make changes, select
CALIBRATION from the Main menu.
The Description menu, see
1. SYSTEM: See Figure 27 (page
2. mA OUTPUTS: See
3. RELAYS: See Configuring relays (page
4. SWITCHES: See
5. PRISM WASH: See
(page 77).
6. PARAMETERS: See
7. NETWORK: The Ethernet address and card ID of the DTR.
Figure 27 System description
More information
‣ Ethernet connection specification (page 227)
6.4 Viewing sensor status
Select SENSOR STATUS from the Main menu.
6.4.1 Optical image with IDS
Image Detection Stabilization (IDS) compensates for unwanted noise in the image. In the
following figure, the vertical dotted line indicates the position of the shadow edge. For
empty pipe, the optical image resembles the figure on the left side.
Figure 27 (page
55), right side.
Configuring mA outputs (page
Configuring input switches (page
Configuring relays (page 66)
Calibrating concentration measurement (page
Figure 24 (page
55), leads to the following information:
70).
66).
68).
and Configuring prism wash
Chapter 6 – Startup and use
52), opens a path to
72).
55