Reset Button - Vaisala PR-23 Series User Manual

PR-23 Series User Guide IM-EN-PR23-E
4.2.7 Reset button
You can reset and restart both the indicating transmitter DTR and the sensor by pushing the
reset button. You can access the button through the cable hole in the front panel shield as
shown in the following figure. To reach the reset button, use a thin stick or similar utensil,
preferably of non-conducting material. After pushing the reset button, the display blacks out
for a few seconds. The instrument returns to full operation within 30 s.
Reset
button
Figure 11 Location of reset button
36