Identifying Your Refractometer Generation; Figure 112 Sdi Mounting Flange Plug System - Vaisala PR-23 Series User Manual

PR-23 Series User Guide
5
4
3
6
Figure 112 SDI mounting flange plug system
11.9 Identifying your refractometer
generation
The following instructions about inserting and removing Safe‑Drive are written for
Safe‑Drive generation 2.1. If you downloaded the instructions online or ordered a manual as
a spare part, it is possible that your Safe‑Drive system is of different generation and a
different set of instructions is needed. Vaisala strongly recommends upgrading the system
to generation 2.1, for more information see
upgrades-and-notifications/documentation-upgrade-for-safe-drive.
The first place to look for the generation information is the retractor handle. If your retractor
is generation 2, the handle has the code G2. If your retractor is generation 2.1, the handle has
code G2.1. The difference between the generations is visible also when looking at the
retractor and the isolation valve. For more information, see the following figure.
214
Use teflon tape
1.1
1.2
2
SPARE PART
ITEM NO. PART NUMBER
1203003
1
PR-9336
2
1202303
3 3825
4 -
PR-9335
5 DIN985, A4, M10
6 DIN933
http://www.kpatents.com/support/product-
DESCRIPTION
Tapered connector
, DN10
Conical hat, DN10
PR-23-SD-PG
O-ring
Stainless nylon insert lock nut
Hexagonal bolt DIN933 x 35 A4
IM-EN-PR23-E
QTY.
1
1
1
1
4
4