Setting The Relay Outputs - Xylem DIQ/S 281 Operating Manual

Outputs
108
6.6

Setting the relay outputs

1 Call up the measured value display with <M>.
Einstellungen/Settings
2 Open the
3 Using < >, highlight the menu item,
links
, and confirm with <OK>. The
appears.
4 Using < >, highlight the
5 Using < >, highlight a line for a relay output (Rx) in the column
Feature
. Confirm with <OK>.
Settings of outputs and links
The
6 Using < >, highlight the menu item,
with <OK>.
Settings of outputs and links
figure 6-15
7 Using < >, select one of the functions listed below. Confirm with
<OK>.
menu with <S>.
Settings of outputs and
Settings of outputs and links
Feature
column. Confirm with <OK>.
display opens.
Relay function
ba76226e02
DIQ/S 281
display
, and confirm
03/2023