Appendix B. Mjk-Field Link Software; Important Notes; Connect A Pc To The Susix - Xylem MJK SuSix Installation And User Manual

Turbidity and Suspended Solids Transmitter

Appendix B. MJK-Field Link Software

The MJK-Field Link software package provides several utilities that will be
described in detail on the following pages:
• PC <-> SuSix
• Saving log data
• Display firmware upgrade
• Converter firmware upgrade
• Language installation

Important Notes!

1. Current SuSix
installing new firmware. See "2. Save Log Data" overleaf.
2. Note down all display and converter settings before upgrading new
firmware.
3. The upgrade procedures below must be carried out in strict alphabeti-
cal order. First procedure A, then B, C, D and finally E.
A. Connect a PC to the SuSix
1. Insert the SuSix
The MJK-Field Link opening menu will appear after a short while (see
below). If the auto-run function does not execute, locate the
"MJK-Field-Link 840110-007.exe" file (or a similar file) and click "Run".
EN 5.10 SuSix Manual 2007
transmitter interconnection
®
log data must be saved in a file before transferring and
®
MJK-Field Link CD-ROM into the PC's disk drive.
®
®
100 FW: 841013-005/843003-001