Electronic Key - Xylem DIQ/S 281 Operating Manual

DIQ/S 281
Switching off the
instrument block
Saving a password
to an electronic
key
ba76226e02
3 Press < > to select the
<OK>.
A security prompt opens.
4 Using < >, select
The settings are adopted.
Access control
The
The current passwords are visible.
1 Press <OK> to open the
The password query is displayed.
2 Enter and confirm the administrator password with < > and
<OK>.
3 Open the
Deactivate the access control.
Take over the setting.

5.3.3 Electronic key

The administrator can simplify access to the DIQ/S 281 by saving the password
to USB memory. The USB memory thereby becomes an electronic key.
When the electronic key is connected to the DIQ/S 281, the user right stored
there with the relevant password is automatically read out. The user of the elec-
tronic key is logged on to the system with his user right without any further pass-
word prompt.
When the electronic key is disconnected, the DIQ/S 281 automatically switches
to the lowest user right.
Passwords for different IQ S
tronic key.
For each IQ S
ENSOR
tronic key.
1 Connect the USB memory to the USB-A interface.
Administrator rights are required when the access control is active.
2 Open the
03/2023
OK
dialog window is still open.
Display/Options
Einstellungen/Settings
N
ENSOR ET
N system only one password can be saved to each elec-
ET
Einstellungen/Settings
Apply settings
function and confirm with
and confirm with <OK>.
Change user rights
/
menu with <S>.
systems can be saved to every elec-
menu with <S>.
Settings/setup
menu.
85