Performing A Function Test Of The Can-Can-Wlan Bridge - PROEMION CANlink wireless 3000 Series Device Manual

Device Manual CANlink wireless
Getting started
4.6.2

Performing a function test of the CAN-CAN-WLAN Bridge

It is advisable to perform a function test before using the device. In order to do so, you can
simulate the CAN bus with the aid of two communication gateways (e.g. CANview USB) and
read it out with RM CAN-Device Monitor software.
The function test procedure is the same as that for the CAN-CAN-Bluetooth Bridge. See chapter
Performing a function test of the CAN-CAN-Bluetooth Bridge.
86
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0