5.2 CAN functions
This chapter provides information on how to use and configure CAN functions.
5.2.1
CAN / CANopen
The CANlink wireless supports the transmission of pure CAN messages to another device. No
direct protocol interpretation is configured in the firmware. This makes it possible to use the
device for different applications with various CAN transport protocols. The protocol logic must
be implemented in the other device (e.g. in the PC software). One implementation example is
the CANopen area of RM CAN-Device Monitor.
INFORMATION
In the standard version of RM CAN-Device Monitor, not all the functions (e.g. EDS
functionality, indicators, and generators) are implemented.
The purchased version of RM CAN-Device Monitor PRO CANopen includes the full scope of
functions.
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
CANlink wireless
Operation
104