Download
Share
Print this page
  1. Manuals
  2. Brands
  3. PROEMION Manuals
  4. Network Hardware
  5. CANlink wireless 3000 Series
  6. Device manual

PROEMION CANlink wireless 3000 Series Device Manual

Hide thumbs Also See for CANlink wireless 3000 Series:

Advertisement

Quick Links

Download this manual
CANlink wireless 3000 Device Manual

Advertisement

loading

Related Manuals for PROEMION CANlink wireless 3000 Series

Summary of Contents for PROEMION CANlink wireless 3000 Series

  • Page 1 CANlink wireless 3000 Device Manual...

  • Page 2: Table Of Contents

    CANlink wireless Device Manual 1. Preamble ................. . .  ...

  • Page 3: Preamble

    CANlink wireless 3000 Device Manual 1. Preamble 1.1. Version CANlink wireless 3000 series Device Manual Table 1. Version history Versi Date Remark 1.0 EN 21.09.201 * First official version 1.1 EN 28.06.20 * Various editorial corrections * Fundamental revision of various contents in the complete manual...

  • Page 4: Legal Notice

    CANlink wireless 3000 Device Manual 1.2. Legal Notice All brands and trademarks named in this document and possibly protected by third-party rights are subject without limitation to the terms of the valid trademark law and intellectual property rights of their respective registered owner.

  • Page 5: Contact

    CANlink wireless 3000 Device Manual 1.3. Contact Proemion GmbH Donaustr. 14 36043 Fulda, Germany Phone: +49 661 9490-0 Fax: +49 661 9490-111 info@proemion.com Proemion Corp. US Subsidiary 241 Taylor St., Suite 301 Dayton, Ohio 45402, USA Phone: +1 937 558 2211 Fax: +1 937 641 8787 info-dayton@proemion.com...

  • Page 6: About This Manual

    CANlink wireless 3000 Device Manual 1.4. About This Manual This document is part of the product and provides important information on the intended use, safety, installation, and operation of the devices described below. The document is intended for qualified technicians and electricians with advanced knowledge in electrical engineering and field bus systems, allowing them to estimate the risks and hazards of operating the device and to integrate it into systems with components of other manufacturers.
  • Page 7 CANlink wireless 3000 Device Manual 1.4.2. Symbols and formatting The following symbols and formatting help you recognize the purpose of the paragraphs: DANGER Nature and source of the danger Consequences of non-observance: Measures to  avoid the danger WARNING Nature and source of the danger Consequences of non-observance: Measures ...
  • Page 8 CANlink wireless 3000 Device Manual 1.4.3. Tasks Tasks are structured as follows: • Aim of the task • Prerequisites for the described task. Step 1. Step 2. Result of correct performance of the task. Step 3.
  • Page 9 CANlink wireless 3000 Device Manual 1.4.4. Lists Lists are indicated as follows. • List item...
  • Page 10 CANlink wireless 3000 Device Manual 1.4.5. Notations The following notations are used in this document: Table 3. Representations Designation Representation Keys, commands, messages Keys, commands, messages Navigation in menus, functions of the user interfaces, file paths FILE > SAVE > … OK button Accessories Cable, adapter :leveloffset: -1...
  • Page 11 CANlink wireless 3000 Device Manual NOTE: INFORMATION The 3001 model variant does not feature an external antenna connector. The antenna is integrated in the device. NOTE: NOTICE Bright spots on the housing surface Residues of primer can lead to bright spots on the surface of the housing, especially near the glue line. - This is due to the production process and cannot be prevented.
  • Page 12 CANlink wireless 3000 Device Manual |5|IC-ID NOTE: NOTICE Use of solvents on the product label can remove or destroy product information. - Keep solvent-containing substances away from the label! NOTE: INFORMATION The device’s type label contains important information. - Do not remove the type label. === Traceability code The traceability code contains the following information.
  • Page 13 CANlink wireless 3000 Device Manual <<< == Intended Use The device provides access to the CAN data of a vehicle or machine in various operating modes: CAN-CAN Bridge: wireless transmission of CAN data between CANlink wireless devices, e.g. as a substitute for CAN cables in drag chains or with remote control units.
  • Page 14 CANlink wireless 3000 Device Manual ================== CE Compliant This device complies with the directives, standards and normative documents listed in Certification and Qualification. ================== [%autowidth] ================== FCC Compliant This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: - The device may not cause harmful interference.
  • Page 15 CANlink wireless 3000 Device Manual ================== NOTE: INFORMATION For more information about compliance, see Certification and Qualification. Should you have any questions, simply contact the support team. See Chapter Service and Support. <<< :hardbreaks: = Device Functions The available model variants differ in the external antenna connector. With the device, you can transmit and receive CAN data via a WLAN or Bluetooth connection.
  • Page 16 CANlink wireless 3000 Device Manual <<< == Scope of Delivery - CANlink wireless 3000 - General product information <<< == Starter Kits Starter kits are available for the device containing the following components: CANlink wireless 3001 starter kit .CANlink wireless 3001 starter kit (part number 253000140) [%autowidth] |Material |Qty |CANlink wireless 3001|1...
  • Page 17 The software can be downloaded from our Download Center at the Document Library. .Software [%autowidth] |Software |Source |CANlink wireless 3000 Configurator |https://www.proemion.com/download-center[Download Center, window=_blank] |Proemion Dashboard |https://www.proemion.com/download-center[Download Center, window=_blank] |Proemion Firmware Programmer |https://www.proemion.com/download-center[Download Center, window=_blank] |RM CAN-Device Monitor |https://www.proemion.com/download-center[Download Center, window=_blank] |Dashboard App |https://play.google.com/store/apps/details?id=proemion.dashboard[Google Play, window=_blank] .Accessories...
  • Page 18 CANlink wireless 3000 Device Manual <<< :hardbreaks: = Service and Support For more information visit the Support website and contact the technical support department by using our Support Form. The latest versions of the drivers, software, firmware, and documentation can be found on our Download Center.
  • Page 19 Danger to life due to electric shock! Risk of severe or fatal injury. • Never carry out repairs to the device yourself. Contact the Proemion support. The device does not contain any parts that can be repaired or maintained by the user.
  • Page 20 CANlink wireless 3000 Device Manual ==== [WARNING] ==== [%autowidth] | WARNING Overload damage due to malfunction. Risk of severe or fatal injury. • To limit power in the event of malfunction, secure the DC power supply circuit during installation with an external 2 A fuse.
  • Page 21 CANlink wireless 3000 Device Manual • Keep substances that contain solvents away from the type label. ==== [NOTE] ==== [%autowidth] | INFORMATION The horizontal distance between antennas can be calculated for every radio signal. The distance between two antennas should always be greater than 1/4 of the wavelength, but not a multiple of the wavelength. If you use several antennas with different radio signals from each other, the distance of the antenna with the lowest frequency range must be observed.
  • Page 22 <<< = Warranty and Liability Proemion assumes no liability for defects caused by normal wear, external influences and incorrect installation, operation or maintenance. This also applies if the customer or a third party modifies the devices, any accessories, or the software without permission from Proemion.
  • Page 23 |CAN – Mobile Device / PC Interface, P2P connection |Bluetooth Classic |Proemion Dashboard App for Android, 3rd Party App for Android or iOS via Byte Command Protocol API, Proemion Dashboard Software |CAN – Mobile Device / PC Interface, P2P connection...
  • Page 24 P2P connection |WLAN Infrastructure mode |WLAN Infrastructure Mode requires an external Access Point |Proemion Dashboard App for Android, 3rd Party App for Android or iOS via Byte Command Protocol API, Proemion Dashboard Software |CAN – CAN Bridge P2P connection |Bluetooth Classic |Recommended communication technology for CAN-CAN bridge |n.a.
  • Page 25 CANlink wireless 3000 Device Manual <<< = Connectors :hardbreaks: The device is equipped with the following connectors: - 1x CAN / power connector - 1x RS232 connector - 1x RF antenna connector (only model variant 3002) <<< == CAN / Power Connector Use the CAN / power connector to connect the device to the CAN bus and supply it with power.
  • Page 26 Only use pin 3 to activate boot mode. Connect pin 3 to the DTR pole of the RS232 Interface of the PC to activate boot mode. The Proemion software automatically controls this signal. In normal operation, this connector must not be occupied.
  • Page 27 CANlink wireless 3000 Device Manual NOTE: INFORMATION With model variant 3001, the RP-SMA antenna connector is replaced by an integrated antenna at the same position. <<< :hardbreaks: = Indicator Element (LED) The front of the device features a two-color LED for indicating function and status. NOTE: INFORMATION The two-color LED features the colors red and green.
  • Page 28 CANlink wireless 3000 Device Manual |Radio module malfunction, voltage critical or CAN error. |Red |Slow Blinking (500 ms on, 500 ms off) |Repair mode ready. |Orange |Flashing (irregularly) |Data transfer to and from other devices. |Orange |Configuration mode or firmware update. <<<...
  • Page 29 CANlink wireless 3000 Device Manual NOTE: INFORMATION The color assignment applies to the cable CAN cable M12 5-pin/open 2M (part number 136000005). D-sub 9-pin connector, female .D-sub 9-pin connector, female [.thumb] image::./64_images/D-Sub-Connector.png[pdfwidth='2in',align="center"] .CAN cable M12 5-pin/D-Sub/Power terminal 15 ON, D-Sub connector [%autowidth] |Pin |Designation |1|not assigned...
  • Page 30 CANlink wireless 3000 Device Manual <<< == RS232 connection cable The USB-RS232 converter cable, M12 5-pin, 1.8 m (part number 257001017) features the following connectors: - 1x M12 5-pin female - 1x USB 2.0 male NOTE: INFORMATION This cable is only intended for configuration and for firmware updates of the CANlink wireless 3000.
  • Page 31 :hardbreaks: Use the CANlink wireless 3000 Configurator software to configure the device. You can evaluate the transmitted data with the Proemion Dashboard or the RM CAN-Device Monitor. The Dashboard app enables you to display data on a smartphone (Android). Use the Proemion Firmware Programmer software for firmware updates.
  • Page 32 CANlink wireless 3000 Device Manual Execute the relevant application file (setup.exe, install.bat or similar) and follow the instructions on the screen to install the software on your PC. <<< = Connecting the Device WARNING: WARNING Overload damage due to malfunction. Risk of severe or fatal injury.
  • Page 33 The device (model variant 3002) features an RP-SMA antenna connector for connection of the RF antenna Bluetooth/WLAN antenna (part number 157000085). TIP: TIP You can request more information about other permitted RF antennas using the Proemion support form at Support. CAUTION: DANGER Danger of explosion due to the operation of electrical equipment in potentially explosive atmospheres.
  • Page 34 CANlink wireless 3000 Device Manual |CAN baudrate |Maximum bus length |1 Mbit/s |25 m |800 kbit/s |50 m |500 kbit/s |100 m |250 kbit/s |250 m |125 kbit/s |500 m |50 kbit/s |1000 m...
  • Page 35 Sub/Power terminal 15 ON (part number 136000187), the power supply unit applicable for your country, and the USB-RS232 converter cable, M12 5-pin, 1.8 m (part number 257001017) from the [Starter Kits]. 1. Install the USB driver pack and CANlink wireless 3000 Configurator from the Proemion Tools CD onto the PC. See chapter [Installing Software].
  • Page 36 CANlink wireless 3000 Device Manual | In this document, only the basic settings for the individual connection methods are listed. Further details on how to configure the CANlink wireless 3000, can be found in the CANlink wireless Configurator manual at the Document Library.
  • Page 37 CANlink wireless 3000 Device Manual |Servers|SPP|Enabled |Server Configuration|Enable|Enabled |Server Configuration|Type|SPP |Clients|-|- <<< == CAN – Mobile Device / PC Interface P2P WLAN Access Point mode Device .CAN – Mobile Device / PC Interface WLAN Access Point mode, Tab Device [%autowidth] |Section|Parameter|Setting |Multipoint Connectivity|Enable multipoint|Disabled |Multipoint Connectivity|Enable multitalking|Disabled...
  • Page 38 CANlink wireless 3000 Device Manual |Servers|TCP|Enabled |Server Configuration|Enable|Enabled |Server Configuration|Type|TCP |Server Configuration|Type|30000 |Clients|-|- <<< == CAN – Mobile Device / PC Interface P2P WLAN Infrastructure mode Device .CAN – Mobile Device / PC Interface WLAN Infrastructure mode, Tab Device [%autowidth] |Section|Parameter|Setting |Multipoint Connectivity|Enable multipoint|Disabled |Multipoint Connectivity|Enable multitalking|Disabled...
  • Page 39 CANlink wireless 3000 Device Manual <<< == CAN – CAN Bridge P2P Bluetooth Classic === CAN – CAN Bridge P2P Bluetooth Classic - SPP Server Device .CAN – CAN Bridge P2P Bluetooth, SPP Server, Tab Device [%autowidth] |Section|Parameter|Setting |Multipoint Connectivity|Enable multipoint|Disabled |Multipoint Connectivity|Enable multitalking|Disabled WLAN .CAN –...
  • Page 40 CANlink wireless 3000 Device Manual |Multipoint Connectivity|Enable multipoint|Disabled |Multipoint Connectivity|Enable multitalking|Disabled WLAN .CAN – CAN Bridge P2P Bluetooth, SPP Client, Tab WLAN [%autowidth] |Section|Parameter| Setting |WLAN Settings|Enable|Disabled Bluetooth .CAN – CAN Bridge P2P Bluetooth, SPP Client, Tab Bluetooth [%autowidth] |Section|Parameter|Setting |Device Configuration|Enable|Enabled |Device Configuration|Device name|Enter a unique name for the Bluetooth device |Device Configuration|Discoverable|Enabled...
  • Page 41 CANlink wireless 3000 Device Manual WLAN .CAN – CAN Bridge P2P Bluetooth, exchangeable peers, SPP Server, Tab WLAN [%autowidth] |Section|Parameter| Setting |WLAN Settings|Enable|Disabled Bluetooth .CAN – CAN Bridge P2P Bluetooth, exchangeable peers, SPP Server, Tab Bluetooth [%autowidth] |Section|Parameter|Setting |Device Configuration|Enable|Enabled |Device Configuration|Device name|Group_Server1 (group name_device name) Use underscore to separate group name and device name.
  • Page 42 CANlink wireless 3000 Device Manual Bluetooth .CAN – CAN Bridge P2P Bluetooth, exchangeable peers, SPP Client, Tab Bluetooth [%autowidth] |Section|Parameter|Setting |Device Configuration|Enable|Enabled |Device Configuration|Device name|Enter a unique name for the Bluetooth device |Device Configuration|Discoverable|Enabled |Device Configuration|Pairable|Enabled |Security Settings|Security mode Bluetooth 2.1|Disabled Wireless Peers .CAN –...
  • Page 43 CANlink wireless 3000 Device Manual Make a note of the key for the subsequent setup of the WLAN connection. |IP Settings|DHCP Mode|Server |IP Settings|Host name|Enter a name for the device within the WLAN. |IP Settings|IP address|192.168.0.33 |IP Settings|Network mask|255.255.255.0 |IP Settings|Gateway address|192.168.0.1 |IP Settings|Primary DNS Server|192.168.0.1 |IP Settings|Secondary DNS Server|192.168.0.2 Bluetooth...
  • Page 44 CANlink wireless 3000 Device Manual Bluetooth .CAN – CAN Bridge P2P WLAN Access Point mode, TCP Client, Tab Bluetooth [%autowidth] |Section|Parameter| Setting |Device Configuration|Enable|Disabled Wireless Peers .CAN – CAN Bridge P2P WLAN Access Point mode, TCP Client, Tab Wireless Peers [%autowidth] |Section|Parameter| Setting |Servers|-|Leave the server settings empty.
  • Page 45 CANlink wireless 3000 Device Manual NOTE: INFORMATION The multi-talking option can be enabled as an additional option. In this case, all CAN messages which have been sent from a specific client to the SPP server will be forwarded to the other client modules. As this significantly reduces the message throughput, leave this option disabled if not necessarily needed.
  • Page 46 CANlink wireless 3000 Device Manual |Multipoint Connectivity|Enable multitalking|Disabled WLAN .CAN – CAN Bridge Multipoint Bluetooth, SPP Client, Tab WLAN [%autowidth] |Section|Parameter| Setting |WLAN Settings|Enable|Disabled Bluetooth .CAN – CAN Bridge Multipoint Bluetooth, SPP Client, Tab Bluetooth [%autowidth] |Section|Parameter|Setting |Device Configuration|Enable|Enabled |Device Configuration|Device name|Enter a unique name for the Bluetooth device |Device Configuration|Discoverable|Enabled |Device Configuration|Pairable|Enabled |Security Settings|Security mode Bluetooth 2.1|Disabled...
  • Page 47 CANlink wireless 3000 Device Manual <<< = Hardware installation :hardbreaks: This chapter provides important notes regarding the hardware setup. NOTE: NOTICE Risk of property damage. - Fasten the cable harness with a suitable strain relief near the CAN / power connector to avoid the transmission of any tension, strains, or vibrations.
  • Page 48 CANlink wireless 3000 Device Manual |#|Description |1|Socket head bolt size M4 with hexagon socket / DIN 912 - ISO 4762, length at least 25 mm |2|Tooth lock washer for M4 according to DIN 6797 - external teeth |3|CANlink wireless 3000 NOTE: NOTICE The recommended tightening torque for assembly is M = 0.9 …...
  • Page 49 - The antenna cable should be as short as possible to keep signal loss on the cable as low as possible. - Do not extend the antenna cable. Only use the antennas which are supplied as accessories by Proemion. Bring the radio module closer to the antenna or order an alternative antenna with a longer antenna cable.
  • Page 50 CANlink wireless 3000 Device Manual additional information regarding the advanced options, can be found in the CANlink wireless Configurator manual at the Document Library. .CANlink wireless 3000 Configurator [.thumb] image::./64_images/CANlink_wireless_Configurator.png[{eightin}] [%autowidth] | The software can be downloaded from our Download Center at the Document Library NOTE INFORMATION Before you connect the device to a USB port on your PC, install the USB driver packet from the...
  • Page 51 CANlink wireless 3000 Device Manual Additional information regarding individual configuration options in CANlink wireless 3000 Configurator can be found within the tooltips. Always use the latest version of CANlink wireless 3000 Configurator with the updated tool tips. .CANlink wireless 3000 Configurator Tooltips [.thumb] image::./64_images/CANlink_wireless_Configurator_ToolTip.png[{eightin}] == Enable Advanced Settings...
  • Page 52 CANlink wireless 3000 Device Manual |Type|CAN Identifier|Default configuration (Node ID 33) |TX SDO 1|0x580 + Node ID|0x5A1 |RX SDO 1|0x600 + Node ID|0x621 |Heartbeat/Boot-Up|0x700 + Node ID|0x721 |NMT|0x000|0x000...
  • Page 53 CANlink wireless 3000 Device Manual To enable the CANopen stack, the Advanced Settings must be activated within the CANlink wireless 3000 Configurator first. Refer to [Enable Advanced Settings]. In the CANopen field of the Device tab enable the checkbox CANopen communication during active wireless connection.
  • Page 54 CANlink wireless 3000 Device Manual |Online CAN object |Binary |11-bit CAN identifier (hex): 0x123|001 0010 0011 |Resulting Filter mask (hex) 0x7ff|111 1111 1111 |CAN messages from CAN bus|001 0010 0011 === Filter Calculation Example 2: CAN messages with the CAN identifiers 0x123, 0x124, and 0x125 are transmitted. The required filter mask must be determined using an XNOR gate.
  • Page 55 Library. NOTE: NOTICE Please note: The firmware for the CANlink wireless 3000 series always consists of two parts. Part one is the application firmware and part two is the firmware for the radio module itself. It must be considered that certain combinations of firmware versions, require a certain installation sequence.
  • Page 56 CANlink wireless 3000 Device Manual | NOTICE Loss of custom configuration The repair mode reset wipes the configuration in the device. No roll-back is possible if the configuration is not read from the device and saved to a file with the CANlink wireless 3000 Configurator. - Read and store the configuration prior to a repair mode reset.
  • Page 57 CANlink wireless 3000 Device Manual Check if the CAB bus termination resistor is correctly installed. |Device is stuck in sleep mode|Check if terminal 15 is connected or VCC is connected to pin 3 of the CAN / Power connector. Use the CAN cable M12 5-pin/D-Sub/Power terminal 15 ON from the starter kit for testing.
  • Page 58 → Is the LED lighting up red? → After which status does the LED light up red? Use the Support Form or just send an email to support@proemion.com to provide the required device information and description of the problem. <<< == Maintenance - Regularly check all connectors for a firm connection.
  • Page 59 CANlink wireless 3000 Device Manual = Annex This chapter contains technical data and certificates. :leveloffset: +1 = Technical Drawings NOTE: INFORMATION You can download the most relevant CAD files from our Download Center. .Dimensions of CANlink wireless 3001 [.thumb] image::./64_images/DrawingClw3001.png[{eightin}] .Dimensions of CANlink wireless 3002 [.thumb] image::./64_images/DrawingClw3002.png[{eightin}]...
  • Page 60 CANlink wireless 3000 Device Manual <<< == Electrical .Electrical data [%autowidth] |Parameter|Value |Supply voltage range terminal 30 DC |8 … 32 V |Power consumption, at 24 V |< 80 mA |Power consumption in sleep mode |< 1 mA |Average power consumption |<...
  • Page 61 CANlink wireless 3000 Device Manual |Parameter|Value |CAN (number, ISO) |1 (ISO 11898-2 High Speed, 2.0 A/B) |CAN specification |2.0 A/B |Max. CAN baud rate |1 Mbit/s |Operating modes | Interface & Bridge mode in Bluetooth or WLAN mode |RS232 |For firmware update and configuration |Bluetooth Standard |Bluetooth classic (2.1+ EDR) and Bluetooth LE 4.0 |WLAN Standard...
  • Page 62 CANlink wireless 3000 Device Manual WLAN Access Point Multipoint (with 7 simultaneous connections): `100 CAN messages per second` WLAN infrastructure mode Multipoint (with 7 simultaneous connections): `500 CAN messages per second` |Average latency period for transmission of a single CAN message Tested with Baud rate: 1 Mbit/s |Bluetooth Bridge Single Point: <...
  • Page 63 CANlink wireless 3000 Device Manual <<< == CAN-WLAN Interface In operation as a CAN-WLAN Interface, CAN data is transmitted wireless to other WLAN-capable devices such as PCs, smartphones or tablets. The CAN-WLAN Interface features two operating modes: infrastructure mode and access point mode. In infrastructure mode, data transmission takes place via one or more access points.
  • Page 64 CANlink wireless 3000 Device Manual |ETSI |2.4 Ghz U-NII-1 U-NII-2 U-NII-2e U-NII-3 |1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13 36, 40, 44, 48 52, 56, 60, 64 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 149, 153, 157, 161, 165 |FCC |2.4 Ghz...
  • Page 65 Please contact our support. See Chapter [Service and Support]. Proemion GmbH hereby declares that the CANlink wireless 3000 communication system complies with the provisions in Directive 2014/53/EU. [%autowidth] |The full text of the declaration of conformity is available at our website Declaration of Conformity.
  • Page 66 CANlink wireless 3000 Device Manual ECE Regulation No. 10 (version 4) Approval number: 10 R-047908 :leveloffset: -1 :leveloffset: -1 Version: 11.0.335...

This manual is also suitable for:

Canlink wireless 3001Canlink wireless 3002