PROEMION CANlink wireless 3000 Series Device Manual page 103

Parameter
P
ASSWORD
S
HOW PASSWORD
WLAN settings field
In the A
UTOMATIC
Bridge.
Parameter
E
NABLE
R
EMOTE ADDRESS
REMOTE PORT
R
EMOTE PROTOCOL
Automatic WLAN connection field
In the IP S
ETTINGS
Parameter
DHCP
MODE
H
OST NAME
IP
ADDRESS
N
ETWORK MASK
G
ATEWAY ADDRESS
P DNS
RIMARY SERVER
S DNS
ECONDARY
SERVER
IP Settings field
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
Description
Input field for the password.
(not visible when PEAP is selected under authentication type.)
Enabled: password is shown.
Disabled: placeholders (*) are shown for the password.
WLAN C field, define the parameters for the CAN-CAN-WLAN
ONNECTION
Description
Enable/disable automatic WLAN connection.
Input field for the IP address or URL of the slave to be connected.
Input field for the port number of the slave to be connected.
Selection for the transmission protocol:
TCP
UDP
field, define the parameters for a network.
Description
C : Parameters are automatically assigned by a DHCP server in
LIENT
the network. Fields not required are grayed out.
D
: For assignment of a fixed IP configuration within a
ISABLED
network.
Input field for the device name in the WLAN network.
Input field for the IP address.
Input field for the network mask.
Input field for the gateway address.
Input field for the primary DNS server.
Input field for the secondary DNS server.
CANlink wireless
Operation
98