15. Enter the following parameters for the Indicator:
Name
Generator Name
ID
Data Type
First Data Byte to generate
Choose Indicator
Indicator CV paramters
16. Click the O
17. Connect the CANlink wireless to your network. See chapter Operation as a CAN-
WLAN Interface.
NOTICE
The following step is only necessary if you have not allocated a fixed IP address to the
CANlink wireless.
18. Identify and make a note of the IP address of the CANlink wireless from the DHCP
overview in the router parameters..
NOTICE
Enter the router's IP address into the browser of the PC in order to access the router
parameters. Navigate to the DHCP overview.
Follow the instructions in the router manual.
19. Connect this or a second PC to the WLAN network.
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
button to confirm the parameters.
K
CANlink wireless
Getting started
Entry
Indicator CV
123
UInt8
Byte 1
Graph
75