PROEMION CANlink wireless 3000 Series Device Manual page 77

CREATING A TEST TRANSMIT-MESSAGE WITH RM CAN-DEVICE MONITOR
1. Identify and make a note of the virtual COM port of the CANview USB in the Device
Manager of the PC.
2. Start RM CAN-Device Monitor on the PC.
INFORMATION
In the standard version of RM CAN-Device Monitor, not all the functions (e.g. EDS
functionality, indicators, and generators) are implemented.
The purchased version of RM CAN-Device Monitor PRO CANopen includes the full scope of
functions.
3. Click T
4. Select the D
5. In the B
6. In the F
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
in the toolbar.
OOLS
S
tab.
EVICE ETTINGS
-R -C A field, select the baud rate set in the CANlink wireless.
IT ATE I
-M field, check the F
EEDBACK ODE
CANlink wireless
Getting started
T M
EEDBACK RANSMIT ESSAGE
box.
72