5.5. CAN-CAN-Bluetooth/WLAN Bridge
Operation as a CAN-CAN-Bluetooth bridge enables wireless transfer of CAN data between two CAN bus systems. In
this case, two CANlink mobile devices or one CANlink mobile 3000 in combination with one CANlink wireless replace
the CAN cable.
INFORMATION
For operation as a CAN-CAN bridge, you can choose the Bluetooth or WLAN wireless interfaces.
Simultaneous use of both wireless interfaces is not possible.
After switching on, a connection is automatically established between a configured master and a slave device. Data is
exchanged bidirectionally as soon as the connection between the two devices has been established.
For more information on the CAN-CAN Bluetooth bridge and CAN-WLAN bridge operating modes, refer to the
CANlink wireless Series 3000 Manual on the
CANlink mobile 3000 Device Manual
Download
Center.