Fcc Notes - PROEMION CANlink wireless 3000 Series Device Manual

2.2 FCC notes

The devices described in this device manual may only be used in mobile or stationary systems in
which the distance between antennas and persons is at least 20 cm. The antennas must further
not be co-located or operated in conjunction with any other antenna or transmitter.
INFORMATION
This device has been tested and found to comply with the limits for a Class B digital device
pursuant to part 15 of the FCC rules. These limits are designed to provide adequate
protection against harmful interference in a residential installation. This device generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause interference to radio communications. There is no
guarantee that interference will not occur in a particular installation. If this device does
cause interference to radio or television reception, which can be determined by switching
the device on and off, the user is advised to try to correct the interference by one or more
of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the distance between the device and the receiver.
 Connect the device and the receiver to different supply circuits.
 Consult the dealer or an experienced radio/TV technician for help.
INFORMATION
Loss of FCC certification possible.
 Only use antennas which are approved for the frequency range used.
 Only use antennas which do not cancel the WLAN or the Bluetooth qualification. See
chapter Connecting an external antenna
 Keep the end of the antenna away from metal components to avoid detuning.
Changes or modifications to the device not expressly approved by the manufacturer can void
the user's authority to operate the device under FCC rules.
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual CANlink wireless
Safety information
19