PROEMION CANlink wireless 3000 Series Device Manual page 44

NOTICE
Connection problems due to faulty screw connection of the cap nut to the RS232
connector.
Insufficient data transmission and connection problems.
 Screw the M12 5-pin angle plug correctly to the RS232 connector using the cap nut.
4. Identify the virtual COM port of the device in the PC Device Manager under USB
Serial Port.
TIP
You can identify the virtual COM port of your device in the Device Manager by
disconnecting and re-connecting the
5. Start the CANlink wireless Configurator on the PC.
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
USB-RS232 converter cable
CANlink wireless
Getting started
at the PC.
39