Intended Use - PROEMION CANlink wireless 3000 Series Device Manual

1.1.3

Intended use

The device provides access to the CAN data of a vehicle or machine in various operating modes:
CAN-CAN Bridge: wireless transmission of CAN data between two CANlink wireless devices,
e.g. as a substitute for CAN cables in drag chains or with remote control units.
CAN-Bluetooth Interface: wireless transmission of CAN data to a Bluetooth terminal device.
CAN-WLAN Interface: wireless transmission of CAN data to a device in the wireless network.
In Interface mode, CAN data can be transmitted to other WLAN/Bluetooth devices such as PCs,
smartphones, and tablets for displaying and evaluation of data.
The device is suitable for use in mobile and stationary systems for industry, small business, and
in agricultural and forestry machinery.
DANGER
Failure of safety-related functions due to deficient data transmission.
Severe injury or death.
The device operates using radio signals and is not authorized for use in safety-related
applications. Insufficient WLAN availability, interference or malfunctioning of the device can
cause faulty data transmission. Because of this, data transmission can not be guaranteed at
all times and under all conditions.
 Never operate the device in machines or applications where life depends on the fault-
free operation of this device.
 Never rely solely on wireless devices for essential communications.
 The device is designed to be used in systems which must be checked for conformity with
the respective valid legal requirements prior to putting into operation. The integrator of
the device is responsible for ensuring that the device complies with all regional
regulations and requirements.
 The device must only be put into operation by qualified technicians and electricians with
advanced knowledge of electrical engineering and fieldbus systems.
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual CANlink wireless
About the device
8