In the first instance of the RM CAN-Device Monitor software, G
I
CV are displayed:
NDICATOR
In the second instance of the RM CAN-Device Monitor software, I
G
C
ENERATOR
LW
When the I
NDICATOR
active transmission process, the function test is completed.
If a constant data transmission is not possible, check the parameters in RM CAN-Device Monitor
software and ensure that the cabling of the devices is correct.
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
are displayed:
CV and the I
NDICATOR
CANlink wireless
ENERATOR
NDICATOR
C
indicate constant data transmission during an
LW
Getting started
CV and
C
and
LW
79