Connecting The Device - PROEMION CANlink wireless 3000 Series Device Manual

4.2 Connecting the device

WARNING
Overload damage due to malfunction.
Severe injury or death.
 To limit power in the event of malfunction, secure the DC power supply circuit during
installation with an external 5 A fuse.
NOTICE
Property damage.
 The device must be installed, connected, and commissioned by a qualified technician.
 Ensure the power supply is disconnected before connecting the device.
 Only use components from the starter kits or the accessories supplied. See chapters
Starter kits and Software and accessories.
If you have any questions, please contact our support team before getting started. See
chapter Service and support.
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual CANlink wireless
Getting started
34