PROEMION CANlink wireless 3000 Series Device Manual page 65

13. Choose F
14. Save the configuration to a file.
15. Choose D
 The configuration is written to the device.
16. Disconnect the device from the PC.
17. Quit CANlink wireless Configurator.
 The configuration of the master device is completed. Now the CAN-CAN-Bluetooth
Bridge is prepared.
INFORMATION
The radio connection between the devices is established automatically when the devices are
switched on. The indicator LED displays the status "WLAN or Bluetooth connection active"
(steady green), see also chapter Indicator elements (LED).
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
→ S
ILE AVE CONFIGURATION
→ W
EVICE RITE DATA TO THE DEVICE
CANlink wireless
Getting started
from the menu.
from the menu.
60