PROEMION CANlink wireless 3000 Series Device Manual page 86

3. Click the WLAN tab.
4. In the WLAN S
5. In the O
6. Enter the name of your network in the SSID box.
7. In the A
8. Enter your network password in the A
9. In the DHCP
 The settings in the IP S
NOTICE
If you want to use the device permanently as a CAN-CAN-WLAN Bridge, select the D
option in the DHCP mode list, then you can configure the IP S
a fixed IP address.
It may be necessary to reserve the IP addresses in the network. To do this, contact the
Administrator.
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
field, check the E
ETTINGS
list, select the I
PERATING MODE
list, select your network's WLAN code.
UTHENTICATION TYPE
list, select C
MODE LIENT
field are automatically allocated by your network.
ETTINGS
CANlink wireless
Getting started
box.
NABLE
mode.
NFRASTRUCTURE
box.
UTHENTICATION KEY
mode.
yourself and allocate
ETTINGS
ISABLED
81