PROEMION CANlink wireless 3000 Series Device Manual page 107

EXPERT TAB
The parameters in this field are for experts and only need to be configured in special cases. In
most applications, the default values can be retained.
In the S -
TART UP
during an active connection (S
).
ESTABLISHED
In the NMT S
TART
bus participants which switches them from "Pre-Operational" to "Operational" status.
Parameter
E
NTER OPERATIONAL
MODE AUTOMATICALLY
S NMT
END START TO
ALL NODES
NMT Start-up Mode field
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
M
field, enable/disable the automatic transmission of CAN messages
ODE
CAN
TART MESSAGE OUTPUT ON WIRELESS SIDE AFTER LINK IS
- M
field, define whether after initialization a command is sent to all
UP ODE
Description
The function is always enabled and cannot be changed.
Enable/disable send CANopen command.
CANlink wireless
Operation
102