PROEMION CANlink wireless 3000 Series Device Manual page 104

In the S S
OCKET
Parameter
E
NABLE
P
ORT NUMBER
P
ROTOCOL
Socket server field
In the C
URRENT
CONNECTION INFORMATION DURING STARTUP
SSID, BSSID, RSSI (Received Signal Strength Indicator), channel, IP address, network mask,
gateway address, primary and secondary DNS are requested while socket and Bluetooth SPP
connections are inactive. These parameter are stored in the CANopen object dictionary of the
device.
For futher information regarding the specific indexes and sub indexes, please refer to the
document "CANlink wireless series 3000 - CANopen Object Dictionary - EN.pdf"
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
field, define the parameters for the network connections to be received.
ERVER
Description
E /
NABLE DISABLE SOCKET SERVER
socket connection can be established to this CANlink wireless on
the specified port using the TCP or UDP protocol.
Input field for the port number.
Selection for the transmission protocol:
TCP
UDP
C I
ONNECTION NFORMATION
CANlink wireless
. If this function is enabled, a
field, enable/disable the S
CAN CURRENT
function. If this feature is activated, the current
Operation
99