Connecting An External Antenna - PROEMION CANlink wireless 3000 Series Device Manual

4.2.1

Connecting an external antenna

The device (model variant 3002) features an RP-SMA antenna connector for connection of the
RF antenna Bluetooth/WLAN antenna, flexible (part number 157 000 085).
TIP
You can request more information about other permitted RF antennas using the PROEMION
support form.
DANGER
Danger of explosion due to the operation of electrical equipment in potentially explosive
atmospheres.
Severe injury or death.
 Observe the applicable regulations and precautions for potentially explosive areas.
 Do not mount the antenna in the close proximity of easily ignited substances (e.g. fuel
tanks) and insufficiently shielded electronic devices.
CAUTION
Health hazards of radio-frequency energy
Slight or medium injury.
 Make sure the device is switched off during installation.
NOTICE
Property damage.
The device or antenna can be damaged.
 Do not shorten or lengthen antenna cables.
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual CANlink wireless
Getting started
35