PROEMION CANlink wireless 3000 Series Device Manual page 117

6. In the list in the C
D
IRECT
7. Identify the device's virtual COM port in the PC's Device Manager.
8. In the list in the C
9. Click the S
 During the firmware update, the LED on the device flashes green.
 In the field F
Firmware downloaded successfully appears when the firmware update is
complete.
INFORMATION
The firmware update may reset configurations saved to the device.
 After the firmware update, load your configuration to the device.
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
P
OMMUNICATION
C RS232.
ONNECTION VIA
P
OMMUNICATION
F D
TART IRMWARE OWNLOAD
D L
IRMWARE OWNLOAD
CANlink wireless
field, select the Interface
ATH
field, select the device's COM port.
ATH
button.
, the message
OG
Operation
112