CONFIGURATION OF THE CAN-CAN-BLUETOOTH BRIDGE MASTER
1. Connect the device to the PC. See chapter Connecting the device with a PC via
RS232.
2. Read out the device information from the CANlink wireless and save the current
configuration. See chapter Saving the device configuration.
3. Choose F
The default parameters for a configuration are loaded.
4. Choose D
The device information is displayed.
5. Make a note of the device serial number.
6. Click the B
7. In the A
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
→ N
ILE
EW CONFIGURATION
→ D
EVICE
EVICE INFORMATION
tab.
LUETOOTH
B
C
UTOMATIC
LUETOOTH
ONNECTION
CANlink wireless
from the menu.
... from the menu.
field, check the E
NABLE
Getting started
box.
58