PROEMION CANlink wireless 3000 Series Device Manual page 71

In the first instance of RM CAN-Device Monitor, G
displayed:
In the second instance of RM CAN-Device Monitor, I
displayed:
When the I
NDICATOR
an active transmission process, the function test is completed.
If a constant data transmission is not possible, check the parameters in the RM CAN-Device
Monitor software and ensure that the cabling of the devices is correct.
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
CL I and the I CL
W NDICATOR
CANlink wireless
Getting started
CL I and I
ENERATOR W NDICATOR
CL I and G
NDICATOR W ENERATOR
II indicate constant data transmission during
W
CL II are
W
CL II are
W
66