PROEMION CANlink wireless 3000 Series Device Manual page 100

In the list in the T
created.
Parameter
O
FF
A
BSOLUTE
R
ELATIVE
Timestamp mode field
In the CAN
OPEN
Parameter
CAN
OPEN NODE
H
EARTBEAT TIME
K CAN
EEP THE
STACK ACTIVE WHILE
CONNECTED
E -
NABLE BOOT UP
MESSAGE
CANopen field
For further information on the functions F
T M
IMESTAMP ODE
PROEMION GmbH | Phone: +49 661 9490-600 | Fax: +49 661 9490-666 | info@proemion.com | proemion.com | Version 1.0
Device Manual
M field, select how the timestamp for received CAN-messages is
IMESTAMP ODE
Description
Timestamp disabled.
The time for the timestamp is counted from the last reset.
The time for the timestamp is counted from the last CAN message.
field, define the parameters for CANopen.
Description
ID
Input field for the CANopen Node ID of the CANlink wireless.
( )
Input field for entering a cycle time for the NMT heartbeat protocol
MS
(0 = NMT heartbeat protocol is disabled).
Access to the CANopen stack is enabled/disabled during an active
OPEN
radio connection.
See chapter Switching on CANopen stack.
Transmission of a CANopen boot-up message is enabled/disabled.
See chapter Boot-Up message.
, see the manual RM Byte Command Manual on the PROEMION Tools CD.
CANlink wireless
CAN
EEDBACK TRANSMIT MESSAGE
Operation
and
95